Interpretation Panel Frames

Through years of experience we have developed a range of frames and stands for interpretation panels with a variety of styles to suit all situations and budgets. Our frames are either made from air-dried oak which gradually fades to a silvery grey or from powder-coated steel. We can also offer a full design and print service - for more information see our specialist website www.interpretation-panels.co.uk.

 

The Woodland Range | The Countryside Range | The Avenue RangeThe Information Post | The Pavement Sign

The Woodland Range

 

Lecturn-style frame, made from air-dried oak with a wide border on all four sides to nicely frame your panel. The back is sealed WBP plywood. This can also be made as an upright panel. The display area is a few millimetres bigger than the interpretation panel so that it can be affixed in a variety of ways. A beading strip covers the edges of your panel, this will cover 10mm of your panel. The wood is left untreated and will weather naturally to a silvery grey. The height of the posts can be adjusted to suit your requirements and allow for 60cm in the ground. contact us for more details.

Download our design and fitting guide. This can also be made as an upright panel, contact us for more details.

 

To fit an A0 panel: £400

To fit an A1 panel: £315

To fit an A2 panel: £265

 

Delivery: £50 per panel.

 

Do you also need your panel designed and printed? See our specialist service.

 

 

The Countryside Range

 

Lecturn-style frame. The frame has a slim frame on three sides with an overhanging top for water protection. The base is left open so water will run off your panel. There is a beading strip to cover the edges of your panel at the top and sides that will cover 10mm of your panel. The back is sealed WBP plywood. The display area is a few millimetres bigger than the interpretation panel so that it can be affixed in a variety of ways. The wood is left untreated and will weather naturally to a silvery grey. The height of the posts can be adjusted to suit your requirements and allow for 60cm in the ground.

 

Download our design and fitting guide. This can also be made as an upright panel, contact us for more details.

 

To fit an A0 panel: £340

To fit an A1 panel: £265

To fit an A2 panel: £220

 

Delivery: £50 per panel.

 

Do you need your panel designed and printed? See our specialist service.

 

 

 

The Avenue Range

 

Lecturn-style steel stand. This ultra-slim stand provides a robust support for your interpretation panel without any edging or framing. Made from steel and finished with a hot zinc primer and powder coated in semi-gloss black. These are ideally matched with the PrimaDura panels (a 3mm thick virtually vandal proof panel) which can be supplied and will then be security screwed to the stand. This range arrives as three pieces, the legs are easily bolted onto the stand with supplied stainless steel bolts.

 

To fit an A1 panel: £270

To fit an A2 panel: £230

PrimaDura panel - print and/or design - POA

 

Delivery: £50 per panel.

 

Do you need your panel designed and/or printed? See our specialist service.​

 
 

The Information Post

 

A simple, budget information panel. Available as A4 portrait or landscape. Green oak post 75mm diameter, total post length 1.2m. Panel is made from WBP plywood with an air-dried oak border. and fixed at a 45-degree angle. The sign sits on top of the panel.

 

The panel can be designed for you, using your text and images and printed on a tough, vandal-resistant panel.

 

A4 information post, including printed panel (artwork supplied by customer): £150

 

Panel design: £75

 

 

Delivery: £15 for one panel, quote on request for multiples.